Amazon EBS volumes and instance store volumes are exposed as NVMe block devices on Nitro-based instances. Windows Server 2012 R2 and later include an NVMe driver, StorNVMe, that is provided Microsoft. However, to achieve the full performance and features provided by Amazon EBS you must have the AWS NVMe driver installed when using an NVMe block device. The latest AWS Windows AMIs for Windows Server 2008 R2 and later contain the required AWS NVMe driver.
Reports Namespace Preferred Write Granularity (NPGW) for EBS volumes that support this optional NVMe feature. For more information, see section 8.25, "Improving Performance through I/O Size and Alignment Adherence," in the NVMe Base Specification, version 1.4.
The 1.4.0 driver version and the latest ebsnvme-id tool (ebsnvme-id.exe) are combined in a single package. This combination allows you to install both driver and tool from a single package. For more details, see Install or upgrade AWS NVMe drivers using PowerShell.
2. Adds [RAW (Light)] to the movie recording size and [IPB (Light)] to 8K/4K to enable lower bit rate shooting. These settings can also be selected when RAW+MP4 is set.3. Adds a high frame rate of 119.9 fps/100.0 fps to the Full HD movie recording size.4. Adds [Electronic full-time MF] to the AF tab of the menu. When a lens is attached, manual focus adjustment is always possible with both One-shot AF and Servo AF.5. Adds [6: Monitor Off] to [Shooting info. disp.: Screen info. settings] in the Shooting tab of the menu. This update makes it possible for the camera's monitor to be turned off at all times during shooting.6. The transfer time (estimated value) now displays on the camera monitor during FTP transfer.7. Adds the ability, when transferring images via FTP, to select protected images that failed to be transferred and protected images that have not yet been transferred and transfer them all at once.8. Adds [Save/load cam settings on card] to the Function settings tab of the menu.This allows you to save the camera settings to a card, or load a saved file and restore the camera to the settings you saved to a card.9. Fixes a phenomenon, in which, in rare instances, the camera does not function normally when using certain CFexpress cards.10. Fixes a phenomenon, in which in rare instances, the camera cannot function normally when the drive mode is set to "High-speed continuous shooting" to shoot still images continuously.11. Fixes a phenomenon in which the power may become suspended when the camera is powered via USB for an extended period of time.
Only run the self installer once. If you install it and Tinfoil will not launch, then you are missing the correct signature patches required to run homebrew titles. If you are unable to obtain the correct homebrew patches, then download the Applet version of Tinfoil.
The 1.0.0 release of MCUboot introduces a format change. It isimportant to either use the imgtool.py also from this release, orpass the -2 to recent versions of the newt tool in order togenerate image headers with the new format. There should be noincompatible format changes throughout the 1.x.y release series.
Cybercase (Stefano Brilli) developed the original version. The current Web MiniDisc Pro fork is developed by asivery. The MiniDisc Wiki hosts Web MiniDisc Pro using Azure Blob Storage and GitHub Actions.
On first visit, or if there has been an update, you will see a changelog window. Quickly check if anything seems relevant to you, then dismiss the box. If the version appears out of date or if you have not used the app in some time, do a cache reload by pressing Ctrl+Shift+R - the hotkey may differ between platforms and operating systems.
As of version 1.3.0, Web MiniDisc Pro supports an external ATRAC3 (LP) encoder. External servers can run encoders such as Sony's SonicStage or PSP encoder for ATRAC3 LP, which will then send a higher-quality file for Web MiniDisc Pro to send to your device.
Q: What Check Point version does it run on ?A: R80.20 for Small and Medium Business AppliancesQ: Is there an unboxing video ?A: Sure, it's right here.
Q: Which other Check Point solution run on GAiA Embedded OS ?A: Check Point's Quantum Edge VNF SD-WAN solution.Q: How much RAM does it feature ?A: 2GB RAMQ: Which MAC addressing scheme is used for the 1500 Appliance series ?A: 00:1C:7F:__:__:__Q: From which SmartCenter version upwards can 1500 appliances be managed centrally ?A: R80.30 Jumbo Hotfix (Take 107) - sk163296 and SmartConsole R80.30 (Build 36) - sk164092A: R80.40 - sk160736
Q: Which browser should I use to manage it ?A: Only use the latest version of Google Chrome. There are some issues known when using Microsoft Internet Explorer to export VPN certificates and when using any Web browser on Apple Mac OS X.
CPython 3.6+, pypy 2.0+. Older versions may work, but are notrecommended as there is no automated regression testing set up for them.libusb-1.0Supported OSespython-libusb1 can be expected to work on:
Fix USBTransfer.cancel exception raising introduced in 1.5.2: it wasaccidentally becomming a bound method, preventing the raise to actuallyhappen (in at least CPython 2.x) or raising type conversion errors (in at leastCPython 3.5.2).
Deprecate USBPollerThread . It is mileading users for which the simple version(a thread calling USBContext.handleEvents) would be enough. And for moreadvanced uses (ie, actually needing to poll non-libusb file descriptors), thisclass only works reliably with epoll: kqueue (which should tehcnically work)has a different API on python level, and poll (which has the same API as epollon python level) lacks the critical ability to change the set of monitored filedescriptors while a poll is already running, causing long pauses - if notdeadlocks.
VyOS, as other GNU+Linux distributions, can be tested without installingit in your hard drive. With your downloaded VyOS .iso file you cancreate a bootable USB drive that will let you boot into a fullyfunctional VyOS system. Once you have tested it, you can either decideto begin a Permanent installation in your hard drive or poweryour system off, remove the USB drive, and leave everything as it was.
Older versions (prior to VyOS 1.1) used to support non-imageinstallation (install system command). Support for this has been removedfrom VyOS 1.2 and newer releases. Older releases can still be upgraded viathe general add system image upgrade command (consultImage Management for further information).
It all began with WWDC 2019, where Apple presented iOS 13, and with it a whole range of technical possibilities, increasing the productivity and usability of iPhone and iPad for the business context. We were eagerly sitting in front of the screen and made a long list of features that we wanted to integrate into the ownCloud iOS app. Now we are proud to present you the ownCloud iOS App version 1.3.0! With this blog article, we want to show you the ideas that captivated us back then and that are now implemented into the ownCloud iOS App.
We already shipped our app with three different themes with version 1.0.0. Since iOS 13 the user can decide if he wants a classic or dark mode interface. Now if you choose System theme in our app, the UI will automatically adapt to the system setting. You still can override this setting by your preferred app theme too.
If you have an iPad you can connect an external keyboard. Apple implemented keyboard commands to use shortcuts. Starting with our app version 1.2.0 it is possible to control the whole ownCloud app with your keyboard. It is not needed to touch on your screen. This will smoothen your workflow and handle tasks faster. It is a great improvement, not only for power users. If you want to know which shortcuts are available, press long on the Command key and you will see which commands currently are available. These shortcuts can differ if an item is selected or not.
In version 1.2.0 we added support to show the album artwork in the lock screen and added controls to skip to the next or previous media file. Another great feature is, you can control the media playback directly from your Apple Watch. This makes the iOS ownCloud app a perfect companion for media playback!
Since version 1.0.0 we have a view called Quick Access. Here you can find collections of all your shares, links, recently changed files, favorites, available offline, images and PDF files. This is really handy to get a fast overview of all these file types without navigating through a directory structure.
Since macOS High Sierra 10.13, the operating system applies a stricter security policy to software that requires kernel extensions (KEXTs). The DisplayLink classic driver installation (version 5.x) includes a system extension (DisplayLinkDriver.kext) that is affected by this policy. The new DisplayLink Manager Graphics Connectivity app (version 1.x) does not use KEXT. This article does not apply if you are using DisplayLink Manager 1.x and macOS Catalina (10.x), Big Sur (11.x) and Monterey (12.x)
If you are using the classic DisplayLink USB Graphics Software for macOS (version 5.x), you have to explicitly enable this system extension in the Security & Privacy system preference after installation before DisplayLink software is allowed to run. 2b1af7f3a8